I am looking for a diagram showing the placement of the interior of a 1988 SUPER SPORT 15. I have a 15-footer hull that we just restored and a SUPER SPORT interior. I want to make sure the interior is put in the right location.
Hearing from anyone who has such a diagram or would be willing to take measurements of their SUPER SPOR 15 will be greatly appreciated.
--Michael
13-footer Seating Placement
-
- Posts: 2
- Joined: Wed Apr 01, 2020 3:36 pm
Re: 1988 SUPER SPORT 15: Drawing showing placement of interior
Hatch and thwart seats are no brainers and you can just measure and duplicate. I used the old interior as the starting point for my interior build, but I didn't like several things that Whaler designed in.
I wanted a 15-gallon tank, the battery, and all wiring and storage to be under andbehind the helm area. You may also want to raise the seats and helm 1.5 to 2-inches as it makes the seats more comfortable to sit in.
I'd offer to take measurements on how I did mine, but it's current under shrink wrap about an hour from my house, but here are some pics to give you and idea.
I used wood cleats under the thwart seats to achieve the desired seating height.
All control, steering and wiring is run through a single rigging tube.
Console is also 1.5-inches higher as the seats are as well. This makes for a more comfortable driving position.
D-
I wanted a 15-gallon tank, the battery, and all wiring and storage to be under andbehind the helm area. You may also want to raise the seats and helm 1.5 to 2-inches as it makes the seats more comfortable to sit in.
I'd offer to take measurements on how I did mine, but it's current under shrink wrap about an hour from my house, but here are some pics to give you and idea.
I used wood cleats under the thwart seats to achieve the desired seating height.
All control, steering and wiring is run through a single rigging tube.
Console is also 1.5-inches higher as the seats are as well. This makes for a more comfortable driving position.
D-
-
- Posts: 2
- Joined: Wed Apr 01, 2020 3:36 pm
Re: 1988 15' super sport
Nice Job, great idea to raise the seats I have the same fuel tank , and thank you.
-
- Posts: 719
- Joined: Fri Jan 15, 2016 11:19 pm
- Location: Queens NY
Re: 1988 15' super sport
That is a gorgeous boat, and the work was well done.
Re: 1988 SUPER SPORT 15: Drawing showing placement of interior
I'm planning the build of my interior right now, and this [thread] is extremely helpful.
I think I'll raise the seats and the console. Most of it I can work out, but I don't have a template for the side railing profile, which seems pretty complicated. The previous owner swapped out the interior for some poorly done thing.
I need guidance or measurements or a downloadable template for a 1979 SUPER SPORT 15.
I think I'll raise the seats and the console. Most of it I can work out, but I don't have a template for the side railing profile, which seems pretty complicated. The previous owner swapped out the interior for some poorly done thing.
I need guidance or measurements or a downloadable template for a 1979 SUPER SPORT 15.
Re: 1988 SUPER SPORT 15: Drawing showing placement of interior
This link may lead you to what you are looking for.
http://continuouswave.com/maintenance-l ... haler.jpeg
Thanks,
M
http://continuouswave.com/maintenance-l ... haler.jpeg
Thanks,
M