Montauk Console Mounting

Repair or modification of Boston Whaler boats, their engines, trailers, and gear
Posts: 24
Joined: Sun Sep 25, 2016 1:57 pm

Montauk Console Mounting

Postby Mattwarner » Wed May 16, 2018 6:30 am

I will be remounting my console to the deck of my Montauk this weekend, I was planning on using number 12 x 1-inch screws to mount the angle bracket to the deck with five on each side.

Are more fixings or longer larger screw needed?

I don't want the console pulling out from the deck, but equally I don't want to drill more or larger holes than needed.

Posts: 11
Joined: Sat Mar 26, 2016 5:04 pm

Re: Montauk Console Mounting

Postby Blackduck » Fri May 18, 2018 4:09 pm

Screws should be #14, 1/4". 1" should be fine, but you can go up to 1 1/4".