Power trim; Jack plate; Setback - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Power trim; Jack plate; Setback

search | FAQ | profile | register | author help

Author Topic:   Power trim; Jack plate; Setback

Jim Bennett posted 05-22-2001 10:22 AM ET (US)
This is my first post since returning to this "new" old Classic Whaler site. Glad to be back. Have a 68 Sakonnet with 79 Merc(115hp)with no power trim/tilt. Am interested in anyone's experience with aftermarket PT/T such as by CMC(Cook Mfg Co)or their jackplate or setbacks. If this info is available on previous thread would appreciate directions on how to find it.
Thanks, Jim
A Li Volsi posted 05-22-2001 10:54 AM ET (US)
I have just recieved my power tilt/trim from CMC. The quality of the piece is excellent and their customer service support was great. When I called them to purcahse a unit, they directed me to an outside source who was selling the unit at a cheaper price!
Instrallation instructions are clear, and the installation seems simple. No hydraulic lines and pumps - only an electric line to the dash.
I plan on putting mine on a '63 17 footer with an '86 90hp Mercury. (or maybe the 55hp Bearcat if I finish it in time for this fishing season!)
jimh posted 05-22-2001 01:06 PM ET (US)
Welcome aboard, Jim Bennett.
This website is not related to any of the previous sites you mention, except that the topic of this segment of the site and some of the participants are the same.
--jimh
Jim Bennett posted 05-24-2001 10:55 PM ET (US)
A Li Volsi,
Appreciate hearing from you later regarding the installation and operation of the CMC unit on your Whaler. Where did you get it and what was the price? Local dealer or mail order?

Jim

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Power trim; Jack plate; Setback
Jim Bennett	posted 05-22-2001 10:22 AM ET (US) This is my first post since returning to this "new" old Classic Whaler site. Glad to be back. Have a 68 Sakonnet with 79 Merc(115hp)with no power trim/tilt. Am interested in anyone's experience with aftermarket PT/T such as by CMC(Cook Mfg Co)or their jackplate or setbacks. If this info is available on previous thread would appreciate directions on how to find it. Thanks, Jim
A Li Volsi	posted 05-22-2001 10:54 AM ET (US) I have just recieved my power tilt/trim from CMC. The quality of the piece is excellent and their customer service support was great. When I called them to purcahse a unit, they directed me to an outside source who was selling the unit at a cheaper price! Instrallation instructions are clear, and the installation seems simple. No hydraulic lines and pumps - only an electric line to the dash. I plan on putting mine on a '63 17 footer with an '86 90hp Mercury. (or maybe the 55hp Bearcat if I finish it in time for this fishing season!)
jimh	posted 05-22-2001 01:06 PM ET (US) Welcome aboard, Jim Bennett. This website is not related to any of the previous sites you mention, except that the topic of this segment of the site and some of the participants are the same. --jimh
Jim Bennett	posted 05-24-2001 10:55 PM ET (US) A Li Volsi, Appreciate hearing from you later regarding the installation and operation of the CMC unit on your Whaler. Where did you get it and what was the price? Local dealer or mail order? Jim