Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Teak Oil

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Teak Oil
David Gilliland posted 05-23-2001 07:22 PM ET (US)   Profile for David Gilliland   Send Email to David Gilliland  
I am down to bare wood on my Outrage 20 and would like opinions on which teak oil is best. Thanks
Tom W Clark posted 05-23-2001 07:49 PM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
Daly's Seafin Teak Oil
kingfish posted 05-23-2001 10:00 PM ET (US)     Profile for kingfish  Send Email to kingfish     

Dick posted 05-23-2001 10:18 PM ET (US)     Profile for Dick  Send Email to Dick     
I vote for Daly's Sea Fin.
Shadowcatcher posted 05-23-2001 10:20 PM ET (US)     Profile for Shadowcatcher  Send Email to Shadowcatcher     
I took lhg's advice and used Amazon for my teak refinishing project last summer and it was fantastic.

If you're going to the trouble of refinishing, use the good stuff.

tbirdsey posted 05-23-2001 11:16 PM ET (US)     Profile for tbirdsey  Send Email to tbirdsey     
I'm an amazon convert.
SeaHag posted 07-16-2002 05:48 PM ET (US)     Profile for SeaHag  Send Email to SeaHag     
Daly's Seafin without a doubt.

The Daly's finish is absolutely incredible. Sand with 4oo grit while still wet to get the dust in the cracks. Gives a very smooth finish. Put 4 coats on (24 hrs in between) and the slight semi-gloss finish is SHARP.

Taylor posted 07-16-2002 05:57 PM ET (US)     Profile for Taylor  Send Email to Taylor     
As we have discussed, there are certainly some wrong choices, but there are lots of right choices too.

I'm in the Seafin camp, touch up/recoat is easy, I did some last Friday.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.