Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Rub Rail

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Rub Rail
ChrisK posted 06-14-2001 05:58 PM ET (US)   Profile for ChrisK   Send Email to ChrisK  
I was in Florida this past week and while picking up at the boat launch in a 2' falling tide, my bow rocked up under a dock and knocked part of the rub rail out of place. I pushed most of it in by hand, but one part is tough to get back in. It's like getting a rain poncho back in those little bags, never easy! Is there any harm in water getting in there? How have most of you dealt with this situation if you 've had it happen? I hate to unscrew the whole rub rail at the stern and re-insert it for fear that it will be even harder. The boat is an Outrage 19' Classic.
dscew posted 06-14-2001 07:56 PM ET (US)     Profile for dscew    
rubber hammers do wonders for this type of thing, depending on what style rub rail you have.
Bigshot posted 06-18-2001 11:28 AM ET (US)     Profile for Bigshot  Send Email to Bigshot     
Big flat screw driver too. It will go in, just takes abit of bullying.
rwest posted 06-18-2001 12:35 PM ET (US)     Profile for rwest  Send Email to rwest     
I vote for the rubber hammer. I had to redo my wiring and ran it thru new double piece rub rail. Had to remove 1/2 of the rail to do so and had to use a rubber hammer to get it back in place.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.