Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Stainless midship grab rails for 18'OR

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Stainless midship grab rails for 18'OR
commodore posted 01-31-2002 07:49 AM ET (US)   Profile for commodore   Send Email to commodore  
I spoke to CMI about ordering these rails that screw/bolt into the teak garboard. Can anyone give me the exact length and height off the teak of the original equipment? Or the degree of angle that the stanchion needs to be?

Thanks

Tom W Clark posted 01-31-2002 12:01 PM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
commodore,

Read this thread: http://continuouswave.com/ubb/Forum1/HTML/000608.html

To answer your questions, the factory grab (not side) rails are 24" overall and stand 5" high. The bend is 63 or 64

You are free to make them whatever size you like and just about any shop that handles tubing should be able to do it for you.

commodore posted 01-31-2002 12:15 PM ET (US)     Profile for commodore  Send Email to commodore     
Thanks, Tom. I can't bring up your photos of the rails. Anyway, I will price them through CMI and try to get a price locally as well. I guess those are my options. Thanks again!
Tom W Clark posted 01-31-2002 12:28 PM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
commodore,

The links in the other thread are dead because of the @home debacle. Here are the new links:

http://home.attbi.com/~tomwclark/grabrailrearview.jpeg
http://home.attbi.com/~tomwclark/grabrailprofile.jpeg

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.