Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  montauk swim platform/ladder

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   montauk swim platform/ladder
gvisko posted 04-10-2002 08:07 PM ET (US)   Profile for gvisko   Send Email to gvisko  
i was at a marina today in mamaroneck ny
today and spoted a newer montauk with a white
swim platform and a 1 step fold down ladder
suported upper and lower stainless brackets
is this from the factory ? or aftermarket
i woud like to install this on my 87 montauk
does any one know were i can purchase one.
and if it could be made in teak

thanks gvisko <><

jmraphis posted 04-10-2002 09:10 PM ET (US)     Profile for jmraphis  Send Email to jmraphis     
I have a factory one that was on a Montauk. It is white with one fold down step. It has all the stainless screes needed to install it. I sell it for $35.00 plus actual shipping.



daverdla posted 04-10-2002 10:01 PM ET (US)     Profile for daverdla  Send Email to daverdla     
I asked my local whaler dealer about adding the factory ladder to my 89 montauk. They said that the additional wood needed to support the ladder was not put in the montauk until the late nineties.

BTW the single step ladders are really difficult to use.


triblet posted 04-10-2002 10:50 PM ET (US)     Profile for triblet  Send Email to triblet     
You can replace the one step ladder with a
Windline three-step telescoping ladder.
Admiral Linda was most appreciatve when I
did this. You do need to place the
three-step on the swim step just so. A
little too far forward, and it will hit the
towing eye. A little too far aft, and it
will really load up the bolts. It's about
plus or minus a half inch.

There's a picture at


gvisko posted 04-10-2002 11:29 PM ET (US)     Profile for gvisko  Send Email to gvisko     
thanks guys

jmraphis i sent you a email with my address
and thank you so much.

chuck thank you for the picture your boat looks great and i will add the 3 step ladder

dave i will see what i can do with the mount on the 87 being in remodeling for 32yrs i will come up with something i will keep you posted. thanks again guys gvisko

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.