Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Montauk rod holder fabricating/dimensions?

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Montauk rod holder fabricating/dimensions?
acassidy posted 04-24-2002 09:45 PM ET (US)   Profile for acassidy   Send Email to acassidy  
What are the dimensions of the Rod holders that go on the front of the console of a Montauk? I will be adding an ice chest/cushion and rod holders/cushion to my boat. And plan on fabricating the rod holder boxes to add the 2 cushion to. Has anyone done this before? Plus I need rod holders for my rods :^) Thanks Archie
whalertim posted 04-25-2002 09:14 AM ET (US)     Profile for whalertim  Send Email to whalertim     
I did this on my Montauk about 1.5 years ago. I had some teak wood and found a set of rod holders on snother Whaler. Measured all Dimensions and made my own. I purchased six surf rod holders, cut them to length and mounted onto my teak wood. Looked Great! Could not tell them from a purchased set. Then I mounted my rod holder pads.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.