Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Modernized Rub Rail

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Modernized Rub Rail
LilSniffWhaler posted 05-16-2002 07:18 PM ET (US)   Profile for LilSniffWhaler   Send Email to LilSniffWhaler  
I bought the rub rail that whaler puts on their new montauks now days. How does the L molding fasten to the boat? do you have to silicone it or what? PLEASE HELP!!!! Thanks a million
EddieS posted 05-17-2002 01:32 AM ET (US)     Profile for EddieS  Send Email to EddieS     

Go to the reference section and look under rubrail replacement. There is a very useful description of how to put it on with some good tips on how to do a really nice job. The L molding is held in place by the plastic channel. You will need a lot of clamps, heat gun, helper and some patience. This is all covered in the reference section.

I just replaced mine last month, and the information there is invaluable.

Good luck


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.