Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Repowering 18' Outrage

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Repowering 18' Outrage
ECUSeaPA posted 06-06-2002 09:13 PM ET (US)   Profile for ECUSeaPA   Send Email to ECUSeaPA  
I hope to repower the restoration project in the next two weeks. Boat is looking great (85 Hull). The rub rail replacement almost whipped me though! Put the new decals on today. Can't wait to get this boat in the water! Leaning toward the Yamaha F115.
tlynch posted 06-06-2002 09:59 PM ET (US)     Profile for tlynch  Send Email to tlynch     
http://continuouswave.com/ubb/Forum4/HTML/000832.html
ECUSeaPA posted 06-06-2002 10:29 PM ET (US)     Profile for ECUSeaPA  Send Email to ECUSeaPA     
Thanks for the heads up. Seems as though he has plowed that ground already.
crashq posted 06-07-2002 04:55 PM ET (US)     Profile for crashq  Send Email to crashq     
Did you replace the rubrail holders or just the rubrail. I am interested in hearing details. I rewired the bow lights last year (by myself) and getting the rubrails back in place was interesting without another set of hands.
ECUSeaPA posted 06-07-2002 06:56 PM ET (US)     Profile for ECUSeaPA  Send Email to ECUSeaPA     
Replaced it ALL. Had to straighten it out in the sun strapped to 2x4's for a day to get it usable. Had 1 extra pair of hands and 2 C Clamps, and duct tape (never accomplished any project without it!) The actual rubber insert was a piece of cake. Use stainless rather than the rivots.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.