Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Mills Bimmini for 2002 Montauk

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Mills Bimmini for 2002 Montauk
Jimm posted 06-18-2002 05:43 PM ET (US)   Profile for Jimm  
I spoke to Mills today and they told me the bimmini top for the 2002 Montauk is 6'9" from the deck. My feeling is that it is this tall due to the fact it folds forward. There is limited space between the front rail and the side rail to mount the "slide" for the top. This is because the rails are mounted on the top of the gunnel as opposed to the side wall in the "old" ones. The Mills top is 6 feet long by 6 feet nine inches wide and costs $743 plus freight.....Jim
AnthonyT posted 06-18-2002 09:57 PM ET (US)     Profile for AnthonyT  Send Email to AnthonyT     
Just received my Console and RPS cover from Mills today for my 2002 Montauk. From what I've seen so far, I'm glad I was advised by this board to give them a call....


tabasco posted 06-19-2002 09:56 AM ET (US)     Profile for tabasco  Send Email to tabasco     
Jimm- That's about $100 cheaper then the one the factory offers and it folds toward the bow.As Martha Stuart would say "that's a good thing"
tabasco posted 06-20-2002 08:29 AM ET (US)     Profile for tabasco  Send Email to tabasco     
Just got an e-mail from Bob Mills with photos of the new Bimini for the new Montauk 170.

Anyone interested in receiving photos just e-mail them at

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.