ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: The Whaler GAM or General Area   one more question    search | FAQ | profile | register | author help

Author	Topic:   one more question
cdnturbo	posted 10-20-2002 10:00 AM ET (US)         This 1984 20' Outrage has a bow rail that is very loose. Are the bolts just threaded into the fibreglass or are there nuts underneath? if there are nuts how do you get at them?
DeePa	posted 10-20-2002 11:21 AM ET (US)             The screws are screwed into wood under the fiberglass. There are wood diagrams on this site showing where the wood is located on your boat. You just have to find the right diagram. Someone else should be able to help you much more than I can.
JBCornwell	posted 10-20-2002 11:53 AM ET (US)             Ahoy CDNturbo. Do a search for "loose bow rails". There have been several threads discussing fixes for loose rails on Montauks. I don't see why those fixes wouldn't work just as well on your OR. Red sky at night.. . JB
DeePa	posted 10-20-2002 05:58 PM ET (US)             Look at that, good old JB covering my behind.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion