ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: The Whaler GAM or General Area   Evinrude/OMC 1981 140hp carb specs    search | FAQ | profile | register | author help

Author	Topic:   Evinrude/OMC 1981 140hp carb specs
Big Tort	posted 03-05-2003 08:52 AM ET (US)         Does anyone out there know the specs for this carburator. I installed the carb kit but the engine seems to run rough???..... Float setting ect...
Bigshot	posted 03-05-2003 10:36 AM ET (US)             Float settings can be found in a seloc or equiv. manual. The most likely thing is you need to synch & link your carbs. OMC carbs have no idle settings so you need to adjust the linkage and synchronize the carbs or she will run rough, especially at idle. This will take any mechanic ten minutes but boat should be in the water when doing so.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic WhalersMETA-Discussion