|
ContinuousWave Whaler Moderated Discussion Areas ContinuousWave: The Whaler GAM or General Area Anyone need a project?
|
Author | Topic: Anyone need a project? |
hardensheetmetal |
posted 03-05-2003 04:50 PM ET (US)
Check this out [url] http://www.usauctions.com/index.cfm?fuse_action=bigPicture&bid=3349&picid=19717[/url] Ouch! Dan |
hardensheetmetal |
posted 03-05-2003 04:52 PM ET (US)
http://www.usauctions.com/index.cfm?fuse_action=bigPicture&bid=3349&picid=19717
|
where2 |
posted 03-05-2003 05:19 PM ET (US)
Probably easier to fix than the guy with the sawed in two whaler... |
Dr T |
posted 03-05-2003 05:26 PM ET (US)
Sort of reminds me of the one last year that got its nose blown off. tds |
BugsyG |
posted 03-05-2003 05:40 PM ET (US)
Good god what happend???!!!!!!!!!!!! JAZZ |
JFM |
posted 03-05-2003 06:00 PM ET (US)
Dan, I didn't know there was that much plywood in the deck of the new Sport. With that much damage it may go cheap enough to get the Mercury for a good deal. It looks brand new. Regards, Jay |
whalerdude |
posted 03-05-2003 06:31 PM ET (US)
that thing got shredded! Too bad its not a bayliner. |
captbone |
posted 03-05-2003 06:44 PM ET (US)
If you read about the motor you would run, it is seized. You will be able to get the whole rig for $500.00. |
hardensheetmetal |
posted 03-05-2003 10:23 PM ET (US)
The really sad part of it is, that someone used to dealing with boats at auction will probably buy it for a grand, make some half-assed repairs (can you say BONDO!). You'll see it go on ebay a month later for $5000.00 to some unsuspection soul that only sees that it is a Whaler. Dan Jay - the plywood surprised me too. I wonder if it is there to mount the full bow rail? |
hardensheetmetal |
posted 03-05-2003 10:32 PM ET (US)
Here is another sick Idea...I have always thought (I have many disturbed thoughts) that it would make quite a statement to be a buried in a 13' Whaler coffin! Here is the perfect candidate! Dan |
JFM |
posted 03-05-2003 10:44 PM ET (US)
No Dan, you would be better served in a Classic for burial at sea. You would also need a ton or 2 of lead. I think that plywood may be a good idea for a trolling motor mount or if it be pine, it would make a good coffin too. Regards, Jay |
andygere |
posted 03-05-2003 11:49 PM ET (US)
Some boatyard will pick this up for a song, patch it up and have a sturdy utility boat for the next 20 years. |
andygere |
posted 03-05-2003 11:53 PM ET (US)
Some boatyard will pick this up for a song, patch it up and have a sturdy utility boat for the next 20 years. |
Florida15 |
posted 03-06-2003 09:22 AM ET (US)
What's with all the plywood ? I'm sure the older Whalers don't have that much plywood in them. I have watched that site for some time now and I think we'll all be surprised what this boat goes for and how many bid on it. Apparently there are quite a few people out there that make a living buying wrecked boats, fixing them up and selling them. |
TightPenny |
posted 03-06-2003 09:55 AM ET (US)
Buried in a Whaler???? You better hope there is not a high ground water table, or that there is a sudden flash flood. You could be raised from the dead, as it were. :) |
GeneNJ |
posted 03-06-2003 01:08 PM ET (US)
The plywood and phenolic blocks alternate around the non-skid surfaces for mounting the cleats, most are just 9 inches long. Just reviewed this at the dealer, using the BW supplied drawing for the 2002 13' sport. |
hardensheetmetal |
posted 03-06-2003 04:01 PM ET (US)
T-penny- Never considered that, I might have to have the mortuary put some lead blocks under me to hold the boat down. Didn't the Egyptians used to float dead bodies down the river (I can see where this might be upseting to other boaters on the river). Dan |
Bigshot |
posted 03-06-2003 04:09 PM ET (US)
Floaters are good! You roll them over and scoop the crabs off for dinner. |
Offshore20 |
posted 03-06-2003 08:33 PM ET (US)
Holy sh@#$t Bigs that is brutal!LOL |
kirk68 |
posted 03-06-2003 09:41 PM ET (US)
Bigshot I will grant that you know much more about BWs than I do and I have found your posting. They have both been insightful and enjoyable. I have been an avid reader of this site for about 6 months and I have to admit that I am hooked. I have not posted much because did not feel I could add to the discussion. However in this case I have had some experience with “floaters” and take my word for it I know they are not that pleasant. Most of us are attracted to BWs because we want to avoid gaining experience in this area. I am not trying to preach ….. because ironically dealing with the dead has a tendency to draw out a sort of sick graveyard humor and I have said and heard much worse than this but the comment just seemed out of character for you. |
JFM |
posted 03-07-2003 03:50 PM ET (US)
Kirk 68, Since you didn't fill in your occupation in your profile, from your comments, I assume you are an undertaker??? Regards, Jay |
hooter |
posted 03-07-2003 04:11 PM ET (US)
The term, "floaters", has a whole diff'rent connotation in the sewerage bid’ness. Glad t'have an undertaker among the membership, though. Never know when y'might need one. |
kirk68 |
posted 03-20-2003 03:00 PM ET (US)
No, I am not an undertaker. I used to work as a lifeguard in the late 1970’s for a state park system. Whenever they lost someone in the lakes the would have us out dragging for them. In most cases they would float up after a few weeks to a couple of months. Needless to say it is an experience not easily forgotten. |
Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.