ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: The Whaler GAM or General Area   Marinium, Wilcox Crittenden    search | FAQ | profile | register | author help

Author	Topic:   Marinium, Wilcox Crittenden
ih3414	posted 12-07-2008 07:45 AM ET (US)         [I] have some lightweight hardware that have no markings. Could they be Marinium? [I] found them with a [Wilcox Crittenden] steering wheel. [T]hank you for any help--richard
project13	posted 12-07-2008 09:08 AM ET (US)             All the marinum I have ever seen is marked as such on parts big and small but I am by no means an authority on the stuff.
jeffs22outrage	posted 12-07-2008 09:22 AM ET (US)             If it was made by Wilcox Crittenden there should at least be a WC stamped into the part.
Tom W Clark	posted 12-07-2008 01:17 PM ET (US)             Remember that Wilcox-Critteneden went through a few owners. The quality of the Marinium hardware varied a bit over the years as well as how it is marked. In my experience, there was always at least the logo cast (not stamped) into the part. The logo is a W and a C superimposed inside an oval.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers