1984 20' Revenage windshield - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  1984 20' Revenage windshield

search | FAQ | profile | register | author help

Author Topic:   1984 20' Revenage windshield

ptoro posted 05-10-2010 08:30 AM ET (US)
Does anyone know where I can buy the alumium "C" channel used as the frame on these windshields. It is a Taylor made unit but they no longer have stock.
home Aside posted 05-10-2010 09:40 AM ET (US)
Maybe TaylorMade can tell you the name of the manufacturer that supplied the C channel to them and you could go from there.
I'd have to search for the specifics, but a couple of years ago they helped me locate the black screw cover molding that goes on outside of the Revenge Windshield even though it was out of production at the time.
I did a bulk purchase for a few members here that needed it for their Revenges.
If you do locate a supplier, please remember to post the information here for other Revenge owners.
Good luck
Par
home Aside posted 05-10-2010 09:47 AM ET (US)
Ptoro,
here is a link to the thread I posted regarding my search for the windshiled screw cover molding, it has some names, phone numbers, etc of persons from TaylorMade who helped me out, maybe they can steer you in the right direction.
http://continuouswave.com/ubb/Forum3/HTML/013471.html

Also FYI in the futrue try using the search function above, it will help you answer almost any questions you might have
Pat

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: 1984 20' Revenage windshield
ptoro	posted 05-10-2010 08:30 AM ET (US) Does anyone know where I can buy the alumium "C" channel used as the frame on these windshields. It is a Taylor made unit but they no longer have stock.
home Aside	posted 05-10-2010 09:40 AM ET (US) Maybe TaylorMade can tell you the name of the manufacturer that supplied the C channel to them and you could go from there. I'd have to search for the specifics, but a couple of years ago they helped me locate the black screw cover molding that goes on outside of the Revenge Windshield even though it was out of production at the time. I did a bulk purchase for a few members here that needed it for their Revenges. If you do locate a supplier, please remember to post the information here for other Revenge owners. Good luck Par
home Aside	posted 05-10-2010 09:47 AM ET (US) Ptoro, here is a link to the thread I posted regarding my search for the windshiled screw cover molding, it has some names, phone numbers, etc of persons from TaylorMade who helped me out, maybe they can steer you in the right direction. http://continuouswave.com/ubb/Forum3/HTML/013471.html Also FYI in the futrue try using the search function above, it will help you answer almost any questions you might have Pat