Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: The Whaler GAM or General Area
  Frequently Asked Question: Drain Tube Replacement

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Frequently Asked Question: Drain Tube Replacement
3whaler posted 09-21-2010 04:40 PM ET (US)   Profile for 3whaler   Send Email to 3whaler  
Where does a person find a long brass drain tube for the transom of a 1981 [Montauk 17]?
Jeff posted 09-21-2010 05:04 PM ET (US)     Profile for Jeff  Send Email to Jeff     
I have ordered mine from McMaster Carr.

http://www.mcmaster.com/#

Part #'s for the tubing:
1 inch O.D. x .032 wall thickness x 3 feet long = #8950K792
1 1/4 inch O.D. x .032 wall thickness x 3 feet long = #8950K832

Part numbers for O-rings:
O-ring for 1 inch tubes = #9557K482 (size=dash 213) ($4.59 pack of 50)
O-ring for 1 1/4 inch tubes = #9557K486 (size=dash 217) ($4.97 pack of 50)

jimh posted 09-21-2010 05:04 PM ET (US)     Profile for jimh  Send Email to jimh     
Your question is a frequently asked question. Answers have been carefuly prepared for frequently asked questions. Please read the answer at

Q12: How Are Drain Tubes Replaced?
http://continuouswave.com/whaler/reference/FAQ/#Q12

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.