ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: The Whaler GAM or General Area   cleaning, rubbing out products    search | FAQ | profile | register | author help

Author	Topic:   cleaning, rubbing out products
renoduckman	posted 04-02-2011 12:48 PM ET (US)         Wanted some thoughts on best cleaning and rubbing out products for the gelcoat on my Whaler. I have been getting ready to do some minor screw hole repairs but just noticed an overall dirty boat that doesnt seem to come clean when i wash it, faded gelcoat, stains from the rubber rollers on the trailer, etc. Kicking my butt here thanks Joe
newt	posted 04-02-2011 06:13 PM ET (US)             If your gelcoat is badly faded, you may want to buff it out. Do a search as there have been many discussions about products, techniques, etc. For a spring clean, I recommend Colonite Fiberglass Cleaner. It is a very mild rubbing compound/cleaner that you rub on just before waxing. The mild abrasiveness will take off dirt, stains, smudges, etc. A little elbow grease is required.

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers