WTB Newport Siderails - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  WTB Newport Siderails

search | FAQ | profile | register | author help

Author Topic:   WTB Newport Siderails

Newtauk1 posted 12-26-2006 10:37 PM ET (US)
Looking to buy a pair (2) siderails for a 1989 Newport. Thanks.
martinmarine posted 12-27-2006 08:56 AM ET (US)
I offer a simple side rail that is top mounted to the gunwales of your boat. This rail is 5.5 inches tall X 60 inches in length and is constructed entirely from 316L grade stainless. The cost for this rail with all necessary hardware and shipping is 129.95.
Additionally, I can build any size custom rail from your supplied dimensions. If you want something different, send me the dimensions and I will be glad to quote you a price.
You can reach my directly at lunker@hargray.com and 8437846110.

Raymond
Martin Marine Design
The Judge posted 12-27-2006 12:04 PM ET (US)
I assume you mean the small hand rails close to the stern of a Newport. These were also available on outrages as well. Unless you have a stern seat they are pretty much useless. I would look into the ones at marine stores which I bought to replace the ones on mine that got bent, about $30 each and look great.
Newtauk1 posted 12-27-2006 01:40 PM ET (US)
I would like to add the rails as I have a small child and want the extra protection.
Judge- Do you know the dimensions?
The Judge posted 12-28-2006 01:38 PM ET (US)
They are about 30" long and about 4" tall, not going to add ANY protection for kids falling over, they are just grab rails. Standard Montauk side rails will not work either as they mount to the hull, not the cap. You want something like Raymond offered above.
The Judge posted 12-28-2006 01:44 PM ET (US)
These are the factory rails on my Newtauk
http://img.photobucket.com/albums/v225/BiggieFL/Newtauk/kice3.jpg
Newtauk1 posted 12-28-2006 10:38 PM ET (US)
Thanks-Sweet boat.
The Judge posted 12-29-2006 11:49 AM ET (US)
Should have seen it when I bought it...what a wreck. Sold it last spring to buy a 1976 19 Revenge that was also a wreck but sweet as pie now.
Newtauk1 posted 12-29-2006 10:14 PM ET (US)
Will explore a custom option. Thanks all
Newtauk1 posted 02-26-2008 10:26 PM ET (US)
bump
DaveS posted 02-27-2008 01:13 PM ET (US)
Have you checked with CMI? They were the OEM for the rails when whaler was stationed up north...I purchased a few things from them and I must say I was very pleased with the quality...pricey, yes...worth it? Yep!
Good luck!
Dave
Tohsgib posted 02-27-2008 01:48 PM ET (US)
An86carrera had a set off his 19'...give Len a jingle.
Casco Bay Outrage posted 02-27-2008 03:26 PM ET (US)
John -
I think I have those same rails on my 1991 Outrage 17. See http://picasaweb.google.com/CascoBayOutrage/1991Outrage17I/ photo#5102091054273466450
Want me to measure? Hamilton's might stock them or something similar. Can research for ya.
CBO
DaveS posted 02-27-2008 07:27 PM ET (US)
Phil,
Nice picture of your Outrage...it looks like the weather was warm and sunny in that picture! :)
Newtauk1 posted 02-28-2008 03:53 AM ET (US)
Phil, That boat is mint. Would you mind measuring? Do you find the rails useful? I am going with Raymond at Martin Marine Design.
John
Casco Bay Outrage posted 02-28-2008 07:46 PM ET (US)
John -
More than happy to measure for you. I will need a couple of days. It snowed yesterday, today and more for tomorrow night/Saturday. Could be 12+" (We are already at 90" to date).
I really like the rails. Give you good hold going to or sitting in stern seat. Also help with tying off to the non-typical piers/floats.
Will measure and shoot detailed photos for you.
Regards
CBO
Newtauk1 posted 02-28-2008 07:57 PM ET (US)
Phil. Good luck with all that snow. Great for the kids. No need to measure. I placed my order today. I am having them made 36"Lx6"H. I know these are longer than OEM. At this point I am only mounting one rail to the starboard side. I use the Port side to haul lobster pots.I want my son to have the rail in front of him when fishing off the back of the boat.
John
Newtauk1 posted 03-07-2008 02:40 PM ET (US)
I received my custom grab rails via UPS today from Raymond Martin.
He did a terrific job and delivered as promised. He made 2 rails 36" long and 6" high. He also included all the stainless hardware for through bolting to my Newport gunnel. I originally requested 30" rails , but Raymond suggested 36" and he was right on. Thanks Raymond!
I reccommend his company for quality work.
Martin Marine Design& Fabrication
932 Old Charleston Hwy
Hardeeville, SC 29927
843.784.6110
Casco Bay Outrage posted 03-07-2008 03:04 PM ET (US)
Pictures!
Newtauk1 posted 03-07-2008 11:05 PM ET (US)
Phil-Will do on Sunday.
Tohsgib posted 03-08-2008 12:22 AM ET (US)
Cost??
Newtauk1 posted 03-08-2008 02:08 AM ET (US)
$129.95/ pair delivered.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: WTB Newport Siderails
Newtauk1	posted 12-26-2006 10:37 PM ET (US) Looking to buy a pair (2) siderails for a 1989 Newport. Thanks.
martinmarine	posted 12-27-2006 08:56 AM ET (US) I offer a simple side rail that is top mounted to the gunwales of your boat. This rail is 5.5 inches tall X 60 inches in length and is constructed entirely from 316L grade stainless. The cost for this rail with all necessary hardware and shipping is 129.95. Additionally, I can build any size custom rail from your supplied dimensions. If you want something different, send me the dimensions and I will be glad to quote you a price. You can reach my directly at lunker@hargray.com and 8437846110. Raymond Martin Marine Design
The Judge	posted 12-27-2006 12:04 PM ET (US) I assume you mean the small hand rails close to the stern of a Newport. These were also available on outrages as well. Unless you have a stern seat they are pretty much useless. I would look into the ones at marine stores which I bought to replace the ones on mine that got bent, about $30 each and look great.
Newtauk1	posted 12-27-2006 01:40 PM ET (US) I would like to add the rails as I have a small child and want the extra protection. Judge- Do you know the dimensions?
The Judge	posted 12-28-2006 01:38 PM ET (US) They are about 30" long and about 4" tall, not going to add ANY protection for kids falling over, they are just grab rails. Standard Montauk side rails will not work either as they mount to the hull, not the cap. You want something like Raymond offered above.
The Judge	posted 12-28-2006 01:44 PM ET (US) These are the factory rails on my Newtauk http://img.photobucket.com/albums/v225/BiggieFL/Newtauk/kice3.jpg
Newtauk1	posted 12-28-2006 10:38 PM ET (US) Thanks-Sweet boat.
The Judge	posted 12-29-2006 11:49 AM ET (US) Should have seen it when I bought it...what a wreck. Sold it last spring to buy a 1976 19 Revenge that was also a wreck but sweet as pie now.
Newtauk1	posted 12-29-2006 10:14 PM ET (US) Will explore a custom option. Thanks all
Newtauk1	posted 02-26-2008 10:26 PM ET (US) bump
DaveS	posted 02-27-2008 01:13 PM ET (US) Have you checked with CMI? They were the OEM for the rails when whaler was stationed up north...I purchased a few things from them and I must say I was very pleased with the quality...pricey, yes...worth it? Yep! Good luck! Dave
Tohsgib	posted 02-27-2008 01:48 PM ET (US) An86carrera had a set off his 19'...give Len a jingle.
Casco Bay Outrage	posted 02-27-2008 03:26 PM ET (US) John - I think I have those same rails on my 1991 Outrage 17. See http://picasaweb.google.com/CascoBayOutrage/1991Outrage17I/ photo#5102091054273466450 Want me to measure? Hamilton's might stock them or something similar. Can research for ya. CBO
DaveS	posted 02-27-2008 07:27 PM ET (US) Phil, Nice picture of your Outrage...it looks like the weather was warm and sunny in that picture! :)
Newtauk1	posted 02-28-2008 03:53 AM ET (US) Phil, That boat is mint. Would you mind measuring? Do you find the rails useful? I am going with Raymond at Martin Marine Design. John
Casco Bay Outrage	posted 02-28-2008 07:46 PM ET (US) John - More than happy to measure for you. I will need a couple of days. It snowed yesterday, today and more for tomorrow night/Saturday. Could be 12+" (We are already at 90" to date). I really like the rails. Give you good hold going to or sitting in stern seat. Also help with tying off to the non-typical piers/floats. Will measure and shoot detailed photos for you. Regards CBO
Newtauk1	posted 02-28-2008 07:57 PM ET (US) Phil. Good luck with all that snow. Great for the kids. No need to measure. I placed my order today. I am having them made 36"Lx6"H. I know these are longer than OEM. At this point I am only mounting one rail to the starboard side. I use the Port side to haul lobster pots.I want my son to have the rail in front of him when fishing off the back of the boat. John
Newtauk1	posted 03-07-2008 02:40 PM ET (US) I received my custom grab rails via UPS today from Raymond Martin. He did a terrific job and delivered as promised. He made 2 rails 36" long and 6" high. He also included all the stainless hardware for through bolting to my Newport gunnel. I originally requested 30" rails , but Raymond suggested 36" and he was right on. Thanks Raymond! I reccommend his company for quality work. Martin Marine Design& Fabrication 932 Old Charleston Hwy Hardeeville, SC 29927 843.784.6110
Casco Bay Outrage	posted 03-07-2008 03:04 PM ET (US) Pictures!
Newtauk1	posted 03-07-2008 11:05 PM ET (US) Phil-Will do on Sunday.
Tohsgib	posted 03-08-2008 12:22 AM ET (US) Cost??
Newtauk1	posted 03-08-2008 02:08 AM ET (US) $129.95/ pair delivered.