Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Stiletto Polished SS 14x20P 15 spline FS

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Stiletto Polished SS 14x20P 15 spline FS
Tohsgib posted 12-04-2007 02:33 PM ET (US)   Profile for Tohsgib   Send Email to Tohsgib  
This is a perfect 67 hour use Stiletto 14x20 polished 3 blade SS prop with vent holes. The vent holes were filled in with epoxy that I can remove if you want but I notced nothing positive with them hollow. The holes actually made slow planning more difficult but that was just my boat maybe. It is off a Suzuki 115 4 stroke and will fit 90-140 Suzuki/Johnson. It should also fit Honda, Mercury and Yamahas as well in the 4cyl 4 strokes. I will double check for those interested.

Not a ding, etc....$200 shipped to your door(USA of course).

Tohsgib posted 12-17-2007 01:48 PM ET (US)     Profile for Tohsgib  Send Email to Tohsgib     
E-Mailed Tom Clark and yes it will fit Mercury, Yamaha, and Honda 2 & 4 strokes if they have the 15 spline shaft. Just have to use your thrust washer(which is always the case).
Tohsgib posted 04-17-2008 12:03 PM ET (US)     Profile for Tohsgib  Send Email to Tohsgib     
Bump...make an offer!
beer and fish posted 04-26-2008 02:38 PM ET (US)     Profile for beer and fish    
How 'bout $1.00?
kdspawwah posted 04-27-2008 08:28 PM ET (US)     Profile for kdspawwah  Send Email to kdspawwah     
How about a Johnson 112S
Tohsgib posted 04-28-2008 10:08 AM ET (US)     Profile for Tohsgib  Send Email to Tohsgib     
Sure..B&F plus $194 shipping.

No it will not fit a 112 unless you rehubbed it, they are 13 spline.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.