Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Center Console for 15' CC model For Sale

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Center Console for 15' CC model For Sale
runpasthefence posted 01-07-2008 01:29 AM ET (US)   Profile for runpasthefence   Send Email to runpasthefence  
I bought this console a few years ago in preparation for the restoration my 15' is currently undergoing. I have since decided to go another route in terms of my console selection.

For sale is:

- Original Boston Whaler center console, built for the 15' Center Console model
- The console is in good shape. It retains most of its
original gel-coat shine.
- The interior mounting blocks (for electronics, battery
switches, etc) and console base mounting blocks have
been professionally re-fiberglassed and sealed with
gel-coat. Extra mounting surfaces were added in
anticipation of many accessories.

- Brand new Boston Whaler windshield, built to fit 15'CC model boats along with many other Boston Whaler center console boats
- Was purchased new one year ago from Twin Cities marine
and was never installed.
- Windshield mounting kit is included.

$390 plus shipping



runpasthefence posted 01-07-2008 01:33 AM ET (US)     Profile for runpasthefence  Send Email to runpasthefence     

Mounting kit

Refurbished mounting surfaces

Binkie posted 01-07-2008 06:39 AM ET (US)     Profile for Binkie    
Do you know the height and the width of the console.

BTW how is your project 15 coming along. Pictures?


zotcha posted 01-07-2008 07:17 AM ET (US)     Profile for zotcha  Send Email to zotcha     
Good Morning Mick and Rich. That is a sharp looking console. I think I'm still leaning towards something mahogoney and offset. This time I want the battery centerline and paralleling the gunnels. I have a board wide enough to accomplish this however have not looked into required height, and how I am going to raise the starboard side riser to accomplish this. Using 5/4 again and do not have the height for raising right side.

Rich, did you ever design that mahogoney CC that resembled something from the Edgewater factory? That would be sharp with Holly layered into it. Starting with a "fresh canvas" is quite exciting, and overwhelming at the same time. Just really don't want to attempt that rigging tunnel project, so offset is looking more realistic.

Mick, how is your project coming? Wish I had time to run up but have three weeks to get the Jersey Speed Skiff ready for next ACBS show in Fla. Let's see some pics! zot.

runpasthefence posted 01-08-2008 04:44 PM ET (US)     Profile for runpasthefence  Send Email to runpasthefence     
The footprint of the console is 30.5" X 23". The console is 23.5" at its tallest point.

I wish I could share some new pictures, but work stopped over the past few months as I was lacking funds. I made some money of winter break and work will resume this week. I'll keep you guys updated.

Zot, maybe when my rig is all buttoned up I'll take you for a ride and you can hook me up with a ride in your Jersey Skiff. I love those things.


zotcha posted 01-08-2008 08:27 PM ET (US)     Profile for zotcha  Send Email to zotcha     
You got it! Trailer the 15 down and we'll run. Spare room is yours. Would like to come up to see your operation and exchange some ideas. May be running up to Goose Creek to the Sea Fox plant to pick something up. I'll let you know. zot.
runpasthefence posted 01-12-2008 10:13 AM ET (US)     Profile for runpasthefence  Send Email to runpasthefence     
Price reduced to $350.

The console will be listed on sometime within the next couple of days. Starting bid will be $350.


runpasthefence posted 01-21-2008 03:10 PM ET (US)     Profile for runpasthefence  Send Email to runpasthefence item=170187662541

- Listed on Ebay -

jrepp posted 01-22-2008 09:54 PM ET (US)     Profile for jrepp  Send Email to jrepp     
Would this console work for a Newport to Montauk conversion?
friend99 posted 01-22-2008 10:04 PM ET (US)     Profile for friend99    

This console sits too low to be used in a Montauk or Newport if your goal is to stand up and drive. Its made more for sit down hulls like the classic 13' and 15'.

zotcha posted 01-22-2008 10:16 PM ET (US)     Profile for zotcha  Send Email to zotcha     
Found a beautiful Montauk CC at craigslist,savannah, georgia. Good luck. May be able to bring it north next time I come. zot.
runpasthefence posted 02-11-2008 11:00 AM ET (US)     Profile for runpasthefence  Send Email to runpasthefence     
No takers yet. I'm open to offers. I will deliver in South Carolina.

Relisted on the above posted site.



runpasthefence posted 03-05-2008 10:06 PM ET (US)     Profile for runpasthefence  Send Email to runpasthefence     
I'm more than willing to separate, and I'm still open to offers.

From Twin Cities Marine I paid:

$189 for windshield alone
$36 for new windshield mounting kit
= $225 for whole setup not including shipping

I'd accept $180 for the whole setup including shipping.

I'd like to get at least $185 for the console alone. This does not include shipping.



runpasthefence posted 04-10-2008 09:25 AM ET (US)     Profile for runpasthefence  Send Email to runpasthefence     
Re-listed on ebay separately. item=170209439972 item=170209438306

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.