Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Custom Console Rails

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Custom Console Rails
martinmarine posted 01-24-2008 05:02 PM ET (US)   Profile for martinmarine   Send Email to martinmarine  
We now build custom console rails for all boats. Price for the all welded 316L Stainless Steel version is 295.95 with shipping and hardware included. Give me a call at 843-784-6110 or email lunker@hargray.com if you have any questions.

The photo is of the console rail we build for the Boston Whaler 17 Super Sport Limited.

[IMG]http://i33.photobucket.com/albums/d60/Martin-Marine-Design/IMG_2712.jpg[/IMG]

Thank you!

Raymond Martin
Martin Marine Design

DLee posted 01-24-2008 09:52 PM ET (US)     Profile for DLee  Send Email to DLee     
Nice!

http://i33.photobucket.com/albums/d60/Martin-Marine-Design/IMG_2712.jpg

martinmarine posted 01-25-2008 07:56 AM ET (US)     Profile for martinmarine  Send Email to martinmarine     
Thanks DLee!

I also make an anodized aluminum version of the console rail. Cost is 195.00.

Kencvit posted 01-27-2008 12:56 PM ET (US)     Profile for Kencvit  Send Email to Kencvit     
martin, I have a 2004 190 nantucket/outrage with leaning post.
I want to add some type of grab rail on the starboard/passenger side at the helm. My father who is 73 fishes with me. and has problems with balance .
you can support yourself only with your right hand on the side of the console rail. on occasion he has grabbed the engine controls with his left hand for added support which isn`t good. I would like for him to be able to lean against the leaning post and have a grab rail in front of him to hold with both hands . It also has to be far enough to the right to allow for operation of the binnacle when in reverse.
I think that the same console on the 190 is used on the 21 outrage of that vintage.
Can you suggest/design/make for this.
Thanks , ken
martinmarine posted 01-28-2008 08:43 AM ET (US)     Profile for martinmarine  Send Email to martinmarine     
Hello Ken,
I can definitely help you out on this. Can you send me a picture of your console along with the dimensions of the rail? Send them to lunker@hargray.com and I will get back to you with a price quote.

Also, feel free to call me at 8437846110 if you have any questions.

Thanks,
Raymond

milehiwhaler posted 01-28-2008 04:20 PM ET (US)     Profile for milehiwhaler  Send Email to milehiwhaler     
I wanted to comment on the excellent product quality and customer service I received from Martin Marine Design. I had some side rails fabricated for my Nauset last fall and the whole process was great. No affiliation just a satisfied customer.

I just wish we could convince MMD to fabricate a stainless steel stern light pole that would screw into a Perko Light Base. There are a lot of us 16'-7" owners who would love to have a close to OEM 52" light without paying out $175+ for the occasional one posted on ebay.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.