Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  New Yamaha Command Link Gauges

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   New Yamaha Command Link Gauges
mnboater posted 02-29-2008 01:29 AM ET (US)   Profile for mnboater   Send Email to mnboater  
I acquired a new 2 square gauge kit for single engine installation. Yamaha # 6Y8-WE83S-10-00. (I had thought about replacing my SX250 with an F250 but the economics don't work out.) The kit includes tach and speedo/fuel management meter, network cabling, multi hubs, etc. and are compatable, with proper adapters, to other NMEA 2000 complient networks. Visit ... http://www.yamaha-motor.com/outboard/commandLink/page01.aspx
... to read up on the capabilities. They will work with F50 and up 4 strokes and the HPDI 2 strokes.

The gauges are still in original Yamaha packaging. $550.00 + shipping.

Jim Grinde
Athens, AL
256-729-1570
jgrinde@att.net

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.