Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  WTB Transom 'D-RIng"

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   WTB Transom 'D-RIng"
jay18 posted 03-02-2008 12:27 PM ET (US)   Profile for jay18   Send Email to jay18  
If you have got an extra D ring laying around, I am in need of it. Thanks

Jay

westcoastwhaler posted 03-03-2008 01:08 PM ET (US)     Profile for westcoastwhaler  Send Email to westcoastwhaler     
Check e-bay. I picked up a set of SS D-Rings two years ago and have not had any problems with them.
seabob4 posted 03-03-2008 07:22 PM ET (US)     Profile for seabob4  Send Email to seabob4     
Jay,
Let me know what size you need. I take it by "D-ring", you mean stern eye. 2 for $30, 1 for $15. 316 SS with backing plates, washers, and lock nuts. Bolt (or "stud" ends) are 5/8". How thick is your transom?
jay18 posted 03-03-2008 07:54 PM ET (US)     Profile for jay18  Send Email to jay18     
bob. It is for a 22 outrage. Are the ones you have close to whaler look? Thanks
seabob4 posted 03-03-2008 09:59 PM ET (US)     Profile for seabob4  Send Email to seabob4     
Jay,
I will send you a pic tomorrow. From my brief research, they look to be standard stern eyes. My email is seabob4@earthlink.net. Tell me what you think tomorrow eve.
seabob4 posted 03-04-2008 07:23 PM ET (US)     Profile for seabob4  Send Email to seabob4     
Jay,
You have mail.
swede5 posted 03-05-2008 01:25 PM ET (US)     Profile for swede5  Send Email to swede5     
Bob,

Can you please send me a picture. I am in need of two. Not sure if you had additional pieces. Thanks

Binkie posted 03-05-2008 05:34 PM ET (US)     Profile for Binkie  Send Email to Binkie     
I have 2 D-rings I don`t need. I bought them on e-bay a couple of years ago, but never used them. they were supposed to be for the 13 footer. I was told by the seller they are new old stock, but plenty of minute scratches from tumbling around in a drawer somewhere. they look like chrome plated brass to me. Each one has two 3/8" threaded holes about 3/4' deep with course threads. Don`t need them you can have them. E-Mail me.

rich

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.