Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  System Check Tach and wiring harness

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   System Check Tach and wiring harness
JayR posted 03-11-2008 06:44 PM ET (US)   Profile for JayR   Send Email to JayR  
I have the original wiring harness from my 150 E-TEC and the system check tachometer sitting in my garage. It was on the boat for only one trip before I upgraded to the I-Command NMEA 2000.

No idea as to value.
Anyone have a clue?
Anyone need it? I would rather sell it here than ebay.

jasonricher@cox.net

Tohsgib posted 03-12-2008 10:13 AM ET (US)     Profile for Tohsgib  Send Email to Tohsgib     
Systems check tach is about $140 at dealer or $75 at surplus/e-bay. Wiring harness is about $120 dealer and about $65 elsewhwere. When I rigged my OMC in 2002 that is what I paid for new OMC equipment at marine surplus and what the dealer quoted me.
JayR posted 03-12-2008 04:12 PM ET (US)     Profile for JayR  Send Email to JayR     
Thanks....
Several people contacted me regarding it and I didn't know what to ask $$$.

Thanks again, Jason

JayR posted 03-12-2008 04:18 PM ET (US)     Profile for JayR  Send Email to JayR     
http://i65.photobucket.com/albums/h211/BigJayR/boating/P1010002.jpg
http://i65.photobucket.com/albums/h211/BigJayR/boating/P1010001.jpg

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.