Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  15' w/90 E-Tec what props fit?

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   15' w/90 E-Tec what props fit?
an86carrera posted 03-27-2008 02:01 PM ET (US)   Profile for an86carrera   Send Email to an86carrera  
I was going to put my 22" Laser II Mercury small hub prop on the 20" 90 hp but I have heard that the hub is a little bit too large to fit the gearcase.

Any first hand experiences out there?

Thanks,
Len

protek9543 posted 03-27-2008 06:22 PM ET (US)     Profile for protek9543  Send Email to protek9543     
I would be more concerned with staying in the rpm range. What does that motor weigh anyway?

John

an86carrera posted 03-27-2008 07:57 PM ET (US)     Profile for an86carrera  Send Email to an86carrera     
320#
Tohsgib posted 03-28-2008 09:54 AM ET (US)     Profile for Tohsgib  Send Email to Tohsgib     
Should fit Len. Sorry but I am out of OMC props. also think since that engine uses a 15 Stiletto on a Montauk that you will probably need a 19" or so but trial and error is key. When is it coming in?

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.