Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Need Transom D Rings for Katama

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Need Transom D Rings for Katama
Interviewer posted 04-03-2008 06:34 AM ET (US)   Profile for Interviewer   Send Email to Interviewer  
I need a pair of D rings for the transom on my 1970 Katama. Need the ringed nuts for the inside too. Does anyone have a pair or know a source for them? Any leads appreciated. Thanks. Jim from Orlando.
seabob4 posted 04-05-2008 11:47 AM ET (US)     Profile for seabob4  Send Email to seabob4     
Jim,
This has been a hot topic lately. It seems that originally, Perko made these for Whaler, but Whaler has since then bought the tooling. Somebody is making them for Whaler, but I don't know who. It's not Orca's, it's not Southco, which I have contacts at both.Seems to me that if you want a set, you have to go through Whaler Customer Service, and they ain't cheap. And it also seems no one has a spare set laying around. Your best bet is if you still have the originals, try bringing them back to life with a little sandpaper, polishing compond, and elbow grease.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.