Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  WTB backrest/rodholder for montauk

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   WTB backrest/rodholder for montauk
woodduck910 posted 04-27-2008 10:45 PM ET (US)   Profile for woodduck910   Send Email to woodduck910  
I just purchased an 86 montauk and am looking for the rod holders and back cushions that fit on the console above the cooler seat. Anyone have sources?
Casco Bay Outrage posted 04-27-2008 11:22 PM ET (US)     Profile for Casco Bay Outrage  Send Email to Casco Bay Outrage     
The cushions are available from Halls Nautical. Lois and crew make the best around.

The rod holders are no longer commercially made. Joe Kriz and others have made a few sets here and there.

You may make your own, there are downloadable drawings on Whaler Central.

C B O

ratherwhalering posted 04-30-2008 01:17 PM ET (US)     Profile for ratherwhalering  Send Email to ratherwhalering     
I have a set of original c.1987 cushions in very good condition, $85.00 for the set.
ratherwhalering posted 04-30-2008 01:23 PM ET (US)     Profile for ratherwhalering  Send Email to ratherwhalering     
Oh, and I'll throw in a set of six rod holder tubes for an additional $35.00 plus shipping. You'll have to fabricate the wood blocks from Joe's drawings yourself...too much of a pain in the rear. The tubes are an exact replica of the original flared rod tubes, made from Joe's die.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.