Moderated Discussion Areas
ContinuousWave: Whaler Marketplace
For Sale 1989 22' Outrage
|Author||Topic: For Sale 1989 22' Outrage|
posted 07-18-2008 06:06 PM ET (US)
1989 Whaler Outrage, 1994 200hp. Johnson Ocean Runner,
2006 Continental Aluminum trailer, tenden axels, Aluminum disc brakes. New though hull brass drains, new rub rail, hard coat anodized all aluminum parts, and refinshed the teak. All new control cables. Hydraulic steering. Had good intentions buying the boat, plans changed. Can email pictures to anyone interested. Boat is in Seattle, WA $ 20,000.00 OBO.
posted 07-24-2008 08:00 PM ET (US)
Thank you, thank you. Your link works. You folks are great.
posted 07-24-2008 08:07 PM ET (US)
Thanks to all who helped this gentleman.
posted 07-25-2008 12:16 AM ET (US)
Can you add a little information about the bracket and transom work on the boat?
posted 07-28-2008 11:18 AM ET (US)
The transome extention was made by Saltshaker marine. I think it's original. The motor sets back from the transome about 32". Center portion is a fiberglass chamber, filled with foam and through bolted with 1/2" stainless steel rods. The platform is 30"x 70" with aluminum tube supports at outter edge. The platform is very strong and is a great way of stepping on to the boat from shore or as a swim platform. I like to swim and snorkel so this feature worked good for me. I can take pictures if your interested.
|Tom W Clark||
posted 07-28-2008 12:56 PM ET (US)
I know this boat, in fact I helped Greg replace the bow drain tube a couple years ago.
Greg bought this boat in Florida along with a brand new Continental aluminum trailer. He has put a great deal of time and money into sprucing it up.
As Greg says, the bracket is by Saltshaker Marine (the maker of theh Whaler Drives on the Walkaround models in the 1990s) and appears to have been professionally installed many years ago. It is a nice bracket as it fills the transom notch and gives a lidded storage compartment over the splashwell.
The only things this boat needs (in my opinion) is an OE console grab rail and a classic RPS. As it is now, it is an uncomfortable boat to be in without a solid hand hold standing at the console going 45 MPH, which this boat will do with its 200 HP Johnson and a 14" x 19" Mercury Offshore four blade propeller.
posted 07-28-2008 12:59 PM ET (US)
I'd be interested in seeing more pics of the transom area, close ups, etc., and any other detail pics of the boat.
posted 08-05-2008 11:19 AM ET (US)
I could email you directly more photo's of the tramsome and other parts as well. My last (& first time) go around with photobucket was shakey at best. Tom Clark said the console needed a grab rail. I've always thought a T-top would be better. There is a dealer near me for Atlantic T-tops and I could install that if someone was buying the boat. I'll check out photobucket and see if I can add more photo's.
posted 08-05-2008 09:58 PM ET (US)
I would like to see some detail pictures of the transom infill as well if you can spare the time to post some.
posted 08-08-2008 06:11 PM ET (US)
I am very technology challenged. email me at email@example.com and I will send you photo's. If you could post them I would appreciate it.
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.