Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  WTB a USCG inside Capacity plate for 13 Whaler

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   WTB a USCG inside Capacity plate for 13 Whaler
maverick posted 12-24-2008 07:14 AM ET (US)   Profile for maverick   Send Email to maverick  
Where can I get one of these? My 1962 13' Whaler doesn't have one. thanks, Mav
TransAm posted 12-24-2008 08:22 AM ET (US)     Profile for TransAm    
Try Janice @ Magic Brush.

http://www.magicbrushsign.com/

dino54904 posted 12-24-2008 09:52 AM ET (US)     Profile for dino54904  Send Email to dino54904     
Check with Sue at Twin Cities Marine the BW dealer in Two Rivers Wisconsin. Two years ago I was rebuilding my 1972 19' Outrage and I found a source for capacity labels on line. I sent Sue the link to that source which I can't find in my files anymore. My bet is that she still has it.

Dino

jeffs22outrage posted 12-24-2008 09:56 AM ET (US)     Profile for jeffs22outrage  Send Email to jeffs22outrage     
Dino.

I think you are referring to custommarinelabels.com which is now out of business.

maverick posted 12-24-2008 10:24 AM ET (US)     Profile for maverick  Send Email to maverick     
Thanks. I've bought from Sue before - 1st class operation. I want the metal plate - not a decal, so I may have to get it from a dealer or BWC.
jeffs22outrage posted 12-24-2008 10:48 AM ET (US)     Profile for jeffs22outrage  Send Email to jeffs22outrage     
I do not think metal plates used on the 13's until some time in the late 70's early eighties? My 1975 13 and my 1976 Newport have brown and silver capacity decals and not metal plates. You can not source these silk screen printed metal plates any more for whaler nor, anywhere else that I know of. Many have had luck having new engraved metal plates made by local trophy shops tough. I myself have recreated the files needed to reproduce many of the Whaler capacity plates. I print them out for myself on to a piece of vinyl and laminate them to a piece of 1/16" aluminum stock I have cut.
Dave Thomas posted 12-24-2008 03:25 PM ET (US)     Profile for Dave Thomas  Send Email to Dave Thomas     
No plate was put on the '62 boat.
skred posted 12-25-2008 04:10 PM ET (US)     Profile for skred  Send Email to skred     
My 1973 13 has an aluminum plate - but all the type has worn off....
maverick posted 12-25-2008 05:38 PM ET (US)     Profile for maverick  Send Email to maverick     
I want aluminum if I can find one...thanks, C

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.