Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  WTB - camper back set for Revenge 22 WT

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   WTB - camper back set for Revenge 22 WT
mnboater posted 04-20-2009 09:43 AM ET (US)   Profile for mnboater   Send Email to mnboater  
With the price of fuel more reasonable now, I want to plan some summer boating excursions. I an looking for a Mills camper back enclosure. I recently replaced my flying top with Mills and have the front side and rear drop to match it. I would like to get the rear cockpit area under cover for our evening tie ups. I have the Whaler Drive but the canvas set can be for either a notch transom or WD as I can modify the stern curtain, if necessary. Anyone have an enclosure they are not using??

Jim Grinde

Tom W Clark posted 04-20-2009 03:47 PM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     

There is no such thing as a Mills camper back; they never made such a set. If you want a camper back canvas system, you will have to have one made or buy one from somebody who did.

Jeff posted 04-20-2009 03:58 PM ET (US)     Profile for Jeff  Send Email to Jeff     
Pat (homeaside) had one custom made for his 22 Revenge W/T that attaches to the mills forward piece. ?action=view¤t=DSCN2163-1.jpg ?action=view¤t=DSCN2011.jpg

TransAm posted 04-20-2009 05:45 PM ET (US)     Profile for TransAm  Send Email to TransAm     
Jeff, it seems you have a picture of just about every Whaler with every conceivable option. You ought to put together a historical pictorial reference book and offer it for sale. Since it was my idea, I'll only take 40% of the cut, deal? :-)
JMARTIN posted 04-20-2009 05:58 PM ET (US)     Profile for JMARTIN  Send Email to JMARTIN     
Form member jimP up in Alaska made a fine looking shelter for his Revenge 22. I have seen pictures, but alas, I can not find them now.


Tom W Clark posted 04-20-2009 06:28 PM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
Here is the custom made camper back canvas system on my Revenge Walk Through integrated with the OE Mills flying top and side curtains:

mnboater posted 04-20-2009 06:33 PM ET (US)     Profile for mnboater  Send Email to mnboater     
Tom ... thanks for the clarification. I guess I need to rephrase my request .... does anyone have a camper back that they had made, that will attach to the zippers on original Mills flying top that they would like to sell? The reason I would like to buy an assembled set is that the boat is 1000 miles away and I cannot take it to a canvas shop.

Thanks for the info ....

fno posted 04-20-2009 08:21 PM ET (US)     Profile for fno  Send Email to fno     
Jeff, not to hijack the thread, but do you have any more pics of the Outrage with the T-top. I'm interested in the dodger and attachment to the T-top. P.M. me with any more info.

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.