Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  original rub rail for outrage

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   original rub rail for outrage
Jorders posted 05-05-2009 04:39 PM ET (US)   Profile for Jorders   Send Email to Jorders  
i am looking for a smalll amount of rub rail base. just enough to do the stern portion about 8-10" of Taco V21-9678WHA20D.
Jorders@parkplacecorp.com
thanks.
john.
maverick posted 05-05-2009 07:10 PM ET (US)     Profile for maverick  Send Email to maverick     
Hi John -

I have a complete set off a 13' Whaler, the white base is in pieces but maybe enough there to help you, maybe not the right width/size???. FREE for pickup, and the BEST part is that I'm in AIKEN, SC not too far from you in Greenville, SC! If you want, I can send you a few pics to see what i have if that would help. Mav cwweigle@hotmail.com

maverick posted 05-05-2009 07:28 PM ET (US)     Profile for maverick  Send Email to maverick     
Sent you an email with 4 photos.
Jorders posted 05-06-2009 09:24 AM ET (US)     Profile for Jorders  Send Email to Jorders     
Wow, that is convienient. i got your pics but could not tell. i sent you the Taco web page of the type rail that i am looking for. see if it matches. if so, i will come get it. thanks john.
Jorders@parkplacecorp.com
Sebash4 posted 05-06-2009 10:14 AM ET (US)     Profile for Sebash4  Send Email to Sebash4     
Jorders,

I might have what you need but I'm not sure. Can you email me the Taco web page so I can determine if what I have will work for you?

hlj1824@gmail.com

Tom W Clark posted 05-06-2009 10:35 AM ET (US)     Profile for Tom W Clark  Send Email to Tom W Clark     
No rub rail made by TACO will be compatible with an original rub rail on an Outrage which was made by Barbour.

The original Barbour rub rail on the Outrages is different than the Barbour rub rail on the smaller Whalers like the 13.

Jorders posted 05-06-2009 10:35 AM ET (US)     Profile for Jorders  Send Email to Jorders     
i sent both Maverick and Seabash4 an email. thanks for your help guys. john.
Jorders posted 05-06-2009 10:40 AM ET (US)     Profile for Jorders  Send Email to Jorders     
Thanks for that info Tom. i went to the Barbour web-page but did not see anything like what i have. you seem to have a lot of knowledge on this. any suggestions. john
Jorders posted 05-06-2009 02:21 PM ET (US)     Profile for Jorders  Send Email to Jorders     
Tom, you were exactly correct. thanks for the reply. the part that i am looking for is R1313 not Taco. we'll see what happens.
thanks again for your insight.
john.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.