Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Console Door/Frame $35

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Console Door/Frame $35
Blackduck posted 05-07-2009 11:15 AM ET (US)   Profile for Blackduck   Send Email to Blackduck  
I have a 5-louvered, horizontal console door and frame for sale. The door itself measures 23 1/2" x 9 3/4", one louver bigger than normal, Montauk, Outrage doors, but a 1" bigger cutout could be made. The door itself is in very good condition, and will clean up like new, with very little wear to it. The frame has all it's joints loose, and needs to be re-glued. The only problem is that when made, the dowels were drilled too close to the surface, and are showing through in some places, one, in particular, see photo. When closed, the door covers these areas, so a decent repair wouldn't even show, without the door being open. I think this is an old door, and maybe hard to come by, in any condition.. $35 + shipping. www.blackduckgallery.com/images/Door1.jpg www.blackduckgallery.com/images/door2.jpg www.blackduckgallery.com/images/Door3.jpg www.blackduckgallery.com/images/Door4.jpg www.blackduckgallery.com/images/Door5.jpg
Jeff posted 05-07-2009 01:58 PM ET (US)     Profile for Jeff  Send Email to Jeff     
I will take the door if it is availible.
Blackduck posted 05-07-2009 02:16 PM ET (US)     Profile for Blackduck  Send Email to Blackduck     
It's yours, Jeff, thanks, Walter

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.