Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  WTB Tilt Trim OEM bolt on for 1989 OMC 88 SPL

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   WTB Tilt Trim OEM bolt on for 1989 OMC 88 SPL
superdave_gv posted 06-07-2009 12:38 AM ET (US)   Profile for superdave_gv   Send Email to superdave_gv  

Looking for an OEM / factory OMC used tilt/trim to add to a 1989 Evinrude 88 SPL in working condition. Will need to be capable of being installed with it's own switch because I use an OEM morse control on my 72 16'7".

If this option doesn't exist for me, that would be welcome info. I have a used CMC unit but never installed and selling it to a fellow Lake Lanier Whaler.

Tohsgib posted 06-07-2009 10:57 AM ET (US)     Profile for Tohsgib  Send Email to Tohsgib     
Any trim setup for a 3 or 4cyl OMC will work. Switch is up to you. Make sure you get the relay box as well or you will be screwed for $$.
superdave_gv posted 06-07-2009 07:16 PM ET (US)     Profile for superdave_gv  Send Email to superdave_gv     

Thanks Bigshot, do you know what year ranges will work or to avoid?
an86carrera posted 06-08-2009 06:21 AM ET (US)     Profile for an86carrera  Send Email to an86carrera     
I have one from a 94 90 hp $500. Complete OEM setup, working.


superdave_gv posted 06-08-2009 05:42 PM ET (US)     Profile for superdave_gv  Send Email to superdave_gv     

I found a link on here to the BRP parts site and determined mine is part #0398424.

That site is amazing. I don't know anything about crossflow, two/three wire, looper, etc from all my Google searches. This site shows you "where used" so you can determine what other motors are an exact match. Others may work, too, but this part # is definitely affiliated with various motors from 1987-1991, 60-175 HP.

TheWhalerStore posted 06-08-2009 05:47 PM ET (US)     Profile for TheWhalerStore    
I have one also. Fresh water. Three wire. 375.00
TheWhalerStore posted 06-08-2009 06:41 PM ET (US)     Profile for TheWhalerStore    
Sorry. Mine will not fit yours. I apologize
TheWhalerStore posted 06-08-2009 06:45 PM ET (US)     Profile for TheWhalerStore    
One for sale in Minneapolis Craigslist from someone else.
superdave_gv posted 06-11-2009 07:28 AM ET (US)     Profile for superdave_gv  Send Email to superdave_gv     

Will also consider an exact match that isn't working. Exact match is most likely off an OMC motor 1987-1991 listed on the BRP parts site "where used" for part # 0398424.


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.