Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Montauk Console Wanted

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Montauk Console Wanted
scm68 posted 07-19-2009 08:34 PM ET (US)   Profile for scm68   Send Email to scm68  
I am looking for a center console for a Montauk. My boat currently has an aftermarket side console and I would like to change it to a center console.
My boat is a 1966. I would take either a fiberglass or wood console.
I am located in NY but would gladly pay to have a console shipped to me.
Thank you
overawake posted 07-19-2009 09:50 PM ET (US)     Profile for overawake  Send Email to overawake     
I have a brand new whaler console in new Hampshire. It us the one out of a current model 15 or 17. It is in cut and has a windshild with it too. Retail on it was 950 without the glass.
Make an offer. Where in NY are you? I might be able to help with delivery.
Thanks
Matt
scm68 posted 07-20-2009 11:53 AM ET (US)     Profile for scm68  Send Email to scm68     
Thanks Matt.
Just let me know what you want for it.
Thanks,
Tohsgib posted 07-20-2009 01:35 PM ET (US)     Profile for Tohsgib  Send Email to Tohsgib     
You can buy new wood consoles on E-Bay and bring it back to original Nauset, Easport or Sakonett condition. They did not make a Montauk in 1966.
scm68 posted 07-20-2009 03:49 PM ET (US)     Profile for scm68  Send Email to scm68     
I have tried ebay for the past few weeks and haven't been able to find anything.
I am hoping to get the boat in the water next week so am trying to find something pretty quickly.
SpongeBob posted 07-20-2009 11:09 PM ET (US)     Profile for SpongeBob  Send Email to SpongeBob     
Try http://www.nauticallumber.com/. They make a lot of wood for Whalers including Nauset consoles.


Jeff

wayne baker posted 07-21-2009 12:04 AM ET (US)     Profile for wayne baker  Send Email to wayne baker     
I am looking for a newer console to go with a newer rps. My new style rps is too tall for the older winged console. let me know if you guys do not work a deal.
scm68 posted 07-23-2009 02:28 PM ET (US)     Profile for scm68  Send Email to scm68     
Still haven't found a console. These are harder to find than I would have guessed. Please let me know if anyone has any leads.
Thanks
modenacart posted 07-25-2009 09:39 AM ET (US)     Profile for modenacart  Send Email to modenacart     
Wayne, do you have a winged console you are trying to get ride of?
EAGLEOCNJ posted 07-26-2009 02:43 PM ET (US)     Profile for EAGLEOCNJ  Send Email to EAGLEOCNJ     
See my recent post. I have the console and benches from my Nauset 16'7". Original stuff but worthy of refinishing.

John 609 442 8323

wayne baker posted 07-26-2009 09:04 PM ET (US)     Profile for wayne baker  Send Email to wayne baker     
to update yes I do have a winged console but I have actually had two e mails today so I am in discussion about possible trade at this point.I will update this thread if things do not work out with the guys who have contacted me.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.