katama console wanted - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  katama console wanted

search | FAQ | profile | register | author help

Author Topic:   katama console wanted

leadsled posted 11-18-2010 02:06 PM ET (US)
I just bought a 1968 bare hull that was a sakonnet but the wood was too far gone.I have a non whaler fiberglass console but would rather find a katama console in the new england area.
Tohsgib posted 11-18-2010 02:32 PM ET (US)
You can buy a new wood console for pretty cheap from nautical lumber. Also keep an eye out for a Montauk/Outrage console.
leadsled posted 11-19-2010 06:29 AM ET (US)
As a last resort I would go with the new nauset console.I would like to keep it looking stock. I saw a katama console on cl last year but I did not have this boat then. I bought this boat as a long term project and will look over the winter for a katama console . Thanks J Leno. Tom from mass.
placerville posted 11-19-2010 09:54 PM ET (US)
I have an old Katama console I'd give away for free but you'd have to pay shipping. Or if anyone else wants it, email me.
I live near Sacramento.
Tohsgib posted 11-20-2010 12:47 AM ET (US)
Matt...nice deal. No matter what the shipping, worth it's while if not scrap.
Jeff posted 11-20-2010 01:38 PM ET (US)
Agreed, great offer Matt. I would expect shipping to be $175 - $250 to ship it across the country.
Jeff posted 11-29-2010 05:23 PM ET (US)
Found this today..
http://norfolk.craigslist.org/boa/2081797758.html
ocean31 posted 12-09-2010 07:10 PM ET (US)
Sometime later this winter I will be pulling a complete Katama interior. I am going to install a aftermarket console and a RPS from a Nauset.
If someone was in need of Katama parts please keep me in mind. This unit has good forward seats, but not the bench seat in the back.
I am located in NW Florida, east of Pensacola and about a hour south of I-10, about 4 hours west of Jacksonville.
Possibly some snowbird will be heading North this spring and could take the parts up North, if another CW member needed them.
Thanks

JSB

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: katama console wanted
leadsled	posted 11-18-2010 02:06 PM ET (US) I just bought a 1968 bare hull that was a sakonnet but the wood was too far gone.I have a non whaler fiberglass console but would rather find a katama console in the new england area.
Tohsgib	posted 11-18-2010 02:32 PM ET (US) You can buy a new wood console for pretty cheap from nautical lumber. Also keep an eye out for a Montauk/Outrage console.
leadsled	posted 11-19-2010 06:29 AM ET (US) As a last resort I would go with the new nauset console.I would like to keep it looking stock. I saw a katama console on cl last year but I did not have this boat then. I bought this boat as a long term project and will look over the winter for a katama console . Thanks J Leno. Tom from mass.
placerville	posted 11-19-2010 09:54 PM ET (US) I have an old Katama console I'd give away for free but you'd have to pay shipping. Or if anyone else wants it, email me. I live near Sacramento.
Tohsgib	posted 11-20-2010 12:47 AM ET (US) Matt...nice deal. No matter what the shipping, worth it's while if not scrap.
Jeff	posted 11-20-2010 01:38 PM ET (US) Agreed, great offer Matt. I would expect shipping to be $175 - $250 to ship it across the country.
Jeff	posted 11-29-2010 05:23 PM ET (US) Found this today.. http://norfolk.craigslist.org/boa/2081797758.html
ocean31	posted 12-09-2010 07:10 PM ET (US) Sometime later this winter I will be pulling a complete Katama interior. I am going to install a aftermarket console and a RPS from a Nauset. If someone was in need of Katama parts please keep me in mind. This unit has good forward seats, but not the bench seat in the back. I am located in NW Florida, east of Pensacola and about a hour south of I-10, about 4 hours west of Jacksonville. Possibly some snowbird will be heading North this spring and could take the parts up North, if another CW member needed them. Thanks JSB