13ft Cover - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  13ft Cover

search | FAQ | profile | register | author help

Author Topic:   13ft Cover

Powergroove803 posted 04-04-2011 09:18 AM ET (US)
Any recommendations for a good cover for a 13 with a CC? This may be a one off, not sure if someone has a pattern for a CC 13. Please help!
Prelude posted 04-04-2011 11:40 AM ET (US)
These folks seen to have one for nearly every model.

http://www.millscanvas.com/frame_index2.htm
Depends if you need to tow with it on. I didn't want it on for towing so I ran a 3/4" line from the front to one center support and to the top of the motor and tied off at the prop. Protect the motor top with a pad. Draped a gray canvas tarp over it and tied it down. No rain collects. Total cost less than $30.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: 13ft Cover
Powergroove803	posted 04-04-2011 09:18 AM ET (US) Any recommendations for a good cover for a 13 with a CC? This may be a one off, not sure if someone has a pattern for a CC 13. Please help!
Prelude	posted 04-04-2011 11:40 AM ET (US) These folks seen to have one for nearly every model. http://www.millscanvas.com/frame_index2.htm Depends if you need to tow with it on. I didn't want it on for towing so I ran a 3/4" line from the front to one center support and to the top of the motor and tied off at the prop. Protect the motor top with a pad. Draped a gray canvas tarp over it and tied it down. No rain collects. Total cost less than $30.