|
ContinuousWave Whaler Moderated Discussion Areas ContinuousWave: Whaler Marketplace T-Top: Montauk - $750
|
Author | Topic: T-Top: Montauk - $750 |
koyota |
posted 02-02-2012 09:07 AM ET (US)
Selling T-Top made for Montauk. Excellent condition. Located in Eastern North Carolina. Price $750. Photos can be seen on photobucket (copy and paste in browser) http://s1228.photobucket.com/albums/ee444/koyota1/T-Top/ |
Powergroove803 |
posted 02-02-2012 10:19 AM ET (US)
http://s1228.photobucket.com/albums/ee444/koyota1/T-Top/ Nice looking top! I may be interested but will it fit a 1977 Outrage 19? |
Tohsgib |
posted 02-02-2012 01:58 PM ET (US)
Console dimensions for a "classic Montauk and 19 Banana are the same. You can always have it "tweaked" by a decent welder. If this is off a 170, gonna take a lot of tweaking. You better make sure your console is mounted REALLY well as there is not much in the floor to hold this thing down in a Banana hull. |
Powergroove803 |
posted 02-02-2012 03:01 PM ET (US)
Im not sure I know what the banana hull is, what I am getting is a 1977 Outrage 19. Either way, the T-Top sounds like something I want, look for pm. |
Tohsgib |
posted 02-02-2012 04:03 PM ET (US)
Seriously? All 19/21 outrages & revenges from 1970-1980 were what we called banana hulls because they look like a.... This excludes the late 78+ vhulls but they were even numbered hulls(18,20,22, etc). The vhulls however still used the same size console as the Montauk unless equiped with the later "super console". |
egres |
posted 02-02-2012 04:14 PM ET (US)
Groove, You would do well to remember that in order to anchor a piece of rigging like a t top You will need to have purchase for your fasteners. I do own the very same model and will give you a pointer. In carefully looking at your decking you should observe some round indentations called medallions. Under these deck marks will be layers of plywood from which you will be able to attach your choice of equipment. Thread carefully when adding on extra riggings. I do have printout of the blueprint explaining the underlay of my model and could possibly pass it on if needed. |
koyota |
posted 02-02-2012 08:01 PM ET (US)
The T-Top is off of a Guardian that I purchased in Texas. I did a complete restoration of the Guardian and replaced the T-Top being sold with a custom fiberglass top. The Guardian console width was 30 1/2 inches. |
koyota |
posted 02-22-2012 09:53 AM ET (US)
THE TOP HAS BEEN SOLD |
Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.