Merc 19" stainless prop - Moderated Discussion Areas

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Merc 19" stainless prop

search | FAQ | profile | register | author help

Author Topic:   Merc 19" stainless prop

Bertramp posted 06-01-2012 06:55 AM ET (US)
Mercury outboard stainless steel propeller. Mirage plus, 19" diameter, no dings, model 19P/48-13700.
I needed a 17" and have no need for the 19". Was used with a 225 Optimax.
BERTRAMP1@aol.com
Tom W Clark posted 06-01-2012 10:28 AM ET (US)
Hub type?
PVS, yes or no?
Price?
Bertramp posted 06-01-2012 12:25 PM ET (US)
It's horrible when you have to show your ignorance....
I would have to supply you with a picture as for hub type and don't know what PVS is either.
Sorry.
Price is $250
grossjas posted 06-01-2012 09:34 PM ET (US)
Does it have vent holes on the side of the prop? Does it come with a hub? If so and it is a 15 spline mercury hub I may be interested.
Bertramp posted 06-04-2012 07:47 PM ET (US)
there is no hub.
there is a black dot approx 3/4" in diameter....not sure what it is.
Tom W Clark posted 06-04-2012 09:47 PM ET (US)
OK, good. You have the latest version of the MIRAGEplus. The black dots are the plastic plugs in the PVS vent holes. Also good.
It should be noted that this propeller has a 15-1/4 inch diameter, not 19. 19 inches is the pitch.
The fact there is no hub indicates the propeller uses what is called a "square bore" that accepts any square bore hub kit like Mercury's Flo-Torq. All the manufactures make a square bore hub kit and any can be used in this prop. This prop will fit any brand of outboard of sterndrive that has a large (4-3/4") gearcase.
I use 15-1/4" x 9" Mercury MIRAGEpluss on my own boat and it is an excellent propeller.
For only $250, somebody is going to get a very good deal.
Bertramp posted 06-07-2012 01:23 PM ET (US)
Seems like there is no interest
menahaunt11 posted 06-07-2012 03:04 PM ET (US)
sent you an email.
Bertramp posted 06-08-2012 01:34 PM ET (US)
Tom ... thanks for the clarification
19P is 19" pitch ... I shoulda realized that they were not switching diameters on these.
Bertramp posted 06-19-2012 02:39 PM ET (US)
c'mon .... not even an insulting offer ?

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Merc 19" stainless prop
Bertramp	posted 06-01-2012 06:55 AM ET (US) Mercury outboard stainless steel propeller. Mirage plus, 19" diameter, no dings, model 19P/48-13700. I needed a 17" and have no need for the 19". Was used with a 225 Optimax. BERTRAMP1@aol.com
Tom W Clark	posted 06-01-2012 10:28 AM ET (US) Hub type? PVS, yes or no? Price?
Bertramp	posted 06-01-2012 12:25 PM ET (US) It's horrible when you have to show your ignorance.... I would have to supply you with a picture as for hub type and don't know what PVS is either. Sorry. Price is $250
grossjas	posted 06-01-2012 09:34 PM ET (US) Does it have vent holes on the side of the prop? Does it come with a hub? If so and it is a 15 spline mercury hub I may be interested.
Bertramp	posted 06-04-2012 07:47 PM ET (US) there is no hub. there is a black dot approx 3/4" in diameter....not sure what it is.
Tom W Clark	posted 06-04-2012 09:47 PM ET (US) OK, good. You have the latest version of the MIRAGEplus. The black dots are the plastic plugs in the PVS vent holes. Also good. It should be noted that this propeller has a 15-1/4 inch diameter, not 19. 19 inches is the pitch. The fact there is no hub indicates the propeller uses what is called a "square bore" that accepts any square bore hub kit like Mercury's Flo-Torq. All the manufactures make a square bore hub kit and any can be used in this prop. This prop will fit any brand of outboard of sterndrive that has a large (4-3/4") gearcase. I use 15-1/4" x 9" Mercury MIRAGEpluss on my own boat and it is an excellent propeller. For only $250, somebody is going to get a very good deal.
Bertramp	posted 06-07-2012 01:23 PM ET (US) Seems like there is no interest
menahaunt11	posted 06-07-2012 03:04 PM ET (US) sent you an email.
Bertramp	posted 06-08-2012 01:34 PM ET (US) Tom ... thanks for the clarification 19P is 19" pitch ... I shoulda realized that they were not switching diameters on these.
Bertramp	posted 06-19-2012 02:39 PM ET (US) c'mon .... not even an insulting offer ?