ContinuousWave   Whaler   Moderated Discussion Areas   ContinuousWave: Whaler Marketplace   transom mounts    search | FAQ | profile | register | author help

Author	Topic:   transom mounts
captbobb	posted 10-10-2012 01:55 PM ET (US)         I just painted up 1970 13 Ft and I would like to add a plate between the motor clamps and the transom. I seem to remember seeing on the older whalers, a Plate aprox 3" wide x 9" which accepted the clamp end with a bevel. I cant seem to find online. Any ideas would be appreciated. Bob Capt Bobb Cape Cod/Boston 13' Sport 22' Sea Pro 17' Montauk
Jeff	posted 10-10-2012 03:06 PM ET (US)             Here is your old thread on this topic...I believe you are looking for a Kentfab 13 Trans-dpator http://continuouswave.com/ubb/Forum3/HTML/019464.html
skred	posted 10-12-2012 01:46 PM ET (US)             These guys have several items that would work with the boat: http://www.thmarine.com/products/Outboard-Jack-Plates/ Static-Height-Plates/CMC-Static-Jack-Plate-5-inch-vertical-extension

Hop to: ContinuousWave: The Whaler GAM or General AreaContinuousWave: Whaler MarketplaceContinuousWave: Whaler Repairs/ModsContinuousWave: Whaler PerformanceContinuousWave: Cetacea CommentsContinuousWave: Small Boat ElectricalContinuousWave: Trips and RendezvousContinuousWave: Post-Classic Whalers