Custom water-jet cut 316L Stainless BW Hull Logos

  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Marketplace
  Custom water-jet cut 316L Stainless BW Hull Logos

search | FAQ | profile | register | author help

Author Topic:   Custom water-jet cut 316L Stainless BW Hull Logos

Jamesgt727 posted 03-05-2013 01:14 AM ET (US)
I'm sorry i forgot to post these here, ONLY 36 hours left!!! but I am offering on ebay a custom set of waterjet cut Boston Whaler Hull logos. This was the first set that I had someone cut for me, and due to the technology, he couldn't cut it small enough for my application. The port and starboard logo set is roughly 26" x 5" each. These are made from the finest stainless. At $99.00 i am basically giving them away. They need to be finished by installing new tape and fixing some of the flaws you will see in the photos. Pretty rare opportunity. You can get a $1,000 set of logos pretty cheap. Please read the description and look at the photos.
No comments here please.
Search ebay. "Custom Stainless Boston Whaler logo"
below is the link. If you would like to discuss, send me a message in ebay. Thanks.
http://www.ebay.com/itm/CUSTOM-316L-STAINLESS-BOSTON-WHALER-26-x5-HULL-LOGOS-MIRROR-WATERJET-CUT-/261176983715?pt=Boat_Parts_Accessories_Gear&hash=item3ccf5c80a3&vxp=mtr
Plotman posted 03-05-2013 01:51 PM ET (US)
I thought you needed a license from whaler to sell their trademarked logo...
Jamesgt727 posted 03-05-2013 02:18 PM ET (US)
Dear Plotman, you are so sharp! I should have thought about that. Removed the listing. No longer for sale.
Jeff posted 03-05-2013 02:21 PM ET (US)
Well, they are not even truly correct. The port side logo has the lettering sloping the wrong way and the lettering is incorrect to.
PeteB88 posted 03-05-2013 06:54 PM ET (US)
No thank-you.

Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.

Author	Topic: Custom water-jet cut 316L Stainless BW Hull Logos
Jamesgt727	posted 03-05-2013 01:14 AM ET (US) I'm sorry i forgot to post these here, ONLY 36 hours left!!! but I am offering on ebay a custom set of waterjet cut Boston Whaler Hull logos. This was the first set that I had someone cut for me, and due to the technology, he couldn't cut it small enough for my application. The port and starboard logo set is roughly 26" x 5" each. These are made from the finest stainless. At $99.00 i am basically giving them away. They need to be finished by installing new tape and fixing some of the flaws you will see in the photos. Pretty rare opportunity. You can get a $1,000 set of logos pretty cheap. Please read the description and look at the photos. No comments here please. Search ebay. "Custom Stainless Boston Whaler logo" below is the link. If you would like to discuss, send me a message in ebay. Thanks. http://www.ebay.com/itm/CUSTOM-316L-STAINLESS-BOSTON-WHALER-26-x5-HULL-LOGOS-MIRROR-WATERJET-CUT-/261176983715?pt=Boat_Parts_Accessories_Gear&hash=item3ccf5c80a3&vxp=mtr
Plotman	posted 03-05-2013 01:51 PM ET (US) I thought you needed a license from whaler to sell their trademarked logo...
Jamesgt727	posted 03-05-2013 02:18 PM ET (US) Dear Plotman, you are so sharp! I should have thought about that. Removed the listing. No longer for sale.
Jeff	posted 03-05-2013 02:21 PM ET (US) Well, they are not even truly correct. The port side logo has the lettering sloping the wrong way and the lettering is incorrect to.
PeteB88	posted 03-05-2013 06:54 PM ET (US) No thank-you.