Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Rod Holders

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Rod Holders
Ben posted 06-07-2000 07:37 AM ET (US)   Profile for Ben   Send Email to Ben  
I have a 1977 21 Ft Outrage and want to equip the boat with flush mount rod holders. I am looking for some suggestions on the location and angle of the holders. I would like to install a total of 4.
bigz posted 06-07-2000 10:47 AM ET (US)     Profile for bigz    

The factory installed them with one on each side just aft of the last stanchion of the bow railing and one each side just forward of the the rear hand railing --- they used a teak mounting pad under each of the Lee,I think 60 degree, holders all of which had the rods angled aft --- hope this helps Thomas

Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.