Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Molding for wood console windshelds

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Molding for wood console windshelds
Rogerar posted 07-19-2000 03:04 PM ET (US)   Profile for Rogerar   Send Email to Rogerar  

Does anyone know where to get a replacement for the vinyl molding that goes between the windshield glass and the wood on the mahogany console of my '67 Eastport? This is a standard issue 60's console for the 16'7" hull. Any help is appreciated- I'm almost ready to give up and caulk it. Thanks
Sam Collins posted 07-19-2000 07:43 PM ET (US)     Profile for Sam Collins  Send Email to Sam Collins     
Not sure - but maybe. See my post in OEM section of this forum for Newport Windshield info. Do Not Use the caulk..
Rsess posted 07-19-2000 10:16 PM ET (US)     Profile for Rsess    
Call Jim Knight at Classic Whaler. They had info in previous newsletter with manufacturer of this product. I have a 1971 Nauset. Good Luck
BillS posted 07-20-2000 09:58 AM ET (US)     Profile for BillS  Send Email to BillS     
You can purchase the glazing strip from Petro Plastics, you will need at least 15 feet of it and it will cost about $50 which includes shipping and handling. Ask for "White Boston Whaler Glazing Strip"

Petro Plastics
PO Box 257
450 South Avenue
Garwood, NJ 07027


Post New Topic  Post Reply
Hop to:

Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.