Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  rub rail cleanup

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   rub rail cleanup
TahoeChris posted 07-19-2000 10:23 PM ET (US)   Profile for TahoeChris   Send Email to TahoeChris  
The rub rail on my Montauk, while not completely trashed, was pretty ugly, mostly rubber smudges from dock fenders. I was thinking about replacing the whole thing until I used some #7 rubbing compound, the red stuff, on it. I followed up with an application of "tire foam" (I'm sure any automotive rubber cleaner/glosser would work just as well). Except for some deep gouges, the rail looks almost new. Just thought I would pass along this tip.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.