Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Install Bow Light

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Install Bow Light
Mort posted 08-20-2000 10:23 PM ET (US)   Profile for Mort   Send Email to Mort  
I need to install a bow light assy. on my 17' Montauk. Currentaly there is only a light and because the boat is on a mooring I am going to put the assembly on. Is there a trick to cutting the rub rail and trim? Is there anything else I should be aware of before I start cutting and drilling?
jimh posted 08-21-2000 08:11 AM ET (US)     Profile for jimh  Send Email to jimh     
This topic has come up before. See:

http://continuouswave.com/ubb/Forum3/HTML/000101.html

NOTE: To see all the older posts, jump back to the message topic listing and change the setting in the POP-UP menu to "Show Topics From The Last Year" instead of "Show Topics From Last Ten Days".

--Jim Hebert

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.