Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  interior restoration

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   interior restoration
63sakonnet posted 02-21-2001 02:07 PM ET (US)   Profile for 63sakonnet   Send Email to 63sakonnet  
1963 sakonnet. light blue interior is dull.
also has spider like cracks and a few minor chipped areas on floor.how can i repair the chips, fill in and seal the spider like cracks and shine out the rest of the interior?
jimmer posted 02-21-2001 03:43 PM ET (US)     Profile for jimmer  Send Email to jimmer     
I just polished up the inner hull of the family 69 Sakonnet and got it back to shade of blue and a level of gloss we haven't seen since the Reagan administration. For the polishing I used some compound I had left over from the first stage rub-out of the repaint on an old car I'm restoring and it gave fantastic results with very little effort. It's a 3M product I purchased at a local auto parts supplier. I'll check the product name and post it. To seal the finish I used a Fleetwax which is marketed for boats and aircraft which provids a good long-lasting finish.
As for the cracks and chips, you're going to have to break out the resin and sandpaper!
jimmer posted 02-26-2001 09:30 AM ET (US)     Profile for jimmer  Send Email to jimmer     
The very pretentious name of the stuff I used is 3M Imperial Microfinishing Compound. Like I said before, little effort, big results!

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.