Moderated Discussion Areas
ContinuousWave: Whaler Repairs/Mods
nauset center console
|Author||Topic: nauset center console|
posted 03-09-2001 02:11 PM ET (US)
I am about to begin building a wooden center console for my 1964 nauset. Can anyone tell me the original height and width of the console? Any information would be appreciated. Andre.
posted 03-09-2001 07:08 PM ET (US)
Original width of the upper portion was 36 1/4" and height ranged to 29", depending on the base.
The lower section is snug to the top and thus 35 1/8" wide. Height appeared to vary in several revisions.
posted 03-10-2001 10:33 AM ET (US)
Check that: height is 31.5"
Lower unit is appx 15" H. Upper Unit is 18.25". The two "nest" together to hit the 31.5".
posted 03-14-2001 08:04 AM ET (US)
I noticed a post on 3-5 where as someone has plans to build a mahogony console for that range of models. Kinda hard to read though.. My '63 had its console replaced before I bought her with a fiberglass unit.. lost the character but the function is good.. Nu
posted 04-05-2001 10:44 PM ET (US)
I obtained a copy of the original factory drawings for the Nauset console from Jim Knight of Classic Whaler News a few years back. His operation may be defunct as it has disappeared off the web. The drawings were good enough to make a "to spec" console.
|Tom W Clark||
posted 04-05-2001 11:01 PM ET (US)
Is there any way you can share those drawings?
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.