Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  Bow Rail for Montauk...

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   Bow Rail for Montauk...
mattr posted 04-26-2001 03:42 PM ET (US)   Profile for mattr   Send Email to mattr  
I am looking at a used Montauk without a bow rail. I like the idea of a bow rail, since most of the boat's use will be in the ocean...Does anyone have a resource to buy a new or used bow rail (other than Whaler direct - pricey!) or know of someone who fabricates these kinds of things?

Thanks for your help!!!

mattr

84 Montauk posted 04-27-2001 03:18 PM ET (US)     Profile for 84 Montauk    
Refer to OEM forum for name of supplier
mattr posted 04-27-2001 04:30 PM ET (US)     Profile for mattr  Send Email to mattr     
Thanks for your reply - I appologize for my ignorance - I am a frequent visitor of this forum, but haven't had a reason to look in the OEM section yet... I found just what I was looking for in there!

mattr

rwest posted 04-27-2001 08:56 PM ET (US)     Profile for rwest  Send Email to rwest     
I have just finished a rehab of a 30 year old bare hul into a Nauset. Found a nice originial bow rail, not the welded newer ones, here on the forum. Came from Texas at half the price of a new one. I looked at getting the fittings and 7/8" tube to make my own but that would have cost about $300 based on the fittings and tubing.

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.