Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  13" Bow Eye

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   13" Bow Eye
hardensheetmetal posted 05-16-2001 08:25 PM ET (US)   Profile for hardensheetmetal   Send Email to hardensheetmetal  
I'm starting to put my 1970 13' Sport back together after cleaning it up. When I removed the bow eye off my 1970 13' Sport, ther was a piece of brass, bent into a 'V' being used as a back up plate between the eye and the center ridge that runs down the bow. I know the 1981 13 I had did not have one of these, but I can't remember if there was onw on the 1968 I had. Is this a factory Pc. or someones home made fix? It measures31/4" long and about 3/4" center of 'V' to the edge.

Thanks
Dan

CarlRobert posted 05-18-2001 04:04 PM ET (US)     Profile for CarlRobert    
Dan,

My '62 13' has the original bow eye, and there is no brass plate.

CarlR

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.