Forum: WHALER
  ContinuousWave
  Whaler
  Moderated Discussion Areas
  ContinuousWave: Whaler Repairs/Mods
  rub rail repair

Post New Topic  Post Reply
search | FAQ | profile | register | author help

Author Topic:   rub rail repair
Russell35442 posted 06-19-2001 07:25 AM ET (US)   Profile for Russell35442   Send Email to Russell35442  
I was fishing the oil rigs off Fort Morgan AL recently on a very choppy bay. As I was disconnecting from the rig the bow of my 22' 1983 outrage hit one of the rig supports damaging the rub rail on the bow. The damage is limited to a six inch section of rub rail holder on the port side in a curved section. There is no structural damage to the hull. Anyone have any ideas as to where i might get material to repair the rub rail holder? Any other ideas on repair of this problem? Thanks in advance for your input. John Russell
jimh posted 06-20-2001 08:26 AM ET (US)     Profile for jimh  Send Email to jimh     
Have you read http://continuouswave.com/whaler/reference/rubRail.html ?

Russell35442 posted 06-20-2001 06:18 PM ET (US)     Profile for Russell35442  Send Email to Russell35442     
Jim, Thank you. That is exactly what I needed. Regards, John

Post New Topic  Post Reply
Hop to:


Contact Us | RETURN to ContinuousWave Top Page

Powered by: Ultimate Bulletin Board, Freeware Version 2000
Purchase our Licensed Version- which adds many more features!
© Infopop Corporation (formerly Madrona Park, Inc.), 1998 - 2000.